The Model YL front camera sits just below the front number plate.
On my previous car, a BMW X3 (F25), the front camera got cracked by a stone chip early on and never showed a picture again. The repair quote was 74,250 yen (about $460). In the end, I left it broken all the way to 500,000 km.
So it doesn’t happen again, I stuck an AliExpress lens cover on the Model YL front camera to protect it in advance. Here’s how it went.
My BMW X3 did 500,000 km with a cracked front camera
The X3’s front camera was hit by a stone fairly early on and cracked. From then on, the front camera feed was blank.
The repair quote was 74,250 yen. I couldn’t bring myself to pay that much, so I just kept driving.
I wrote about the X3’s 500,000 km and ten years here.
The Model YL has already taken a stone chip, too, on the windscreen during a trip to Kyushu. Sitting low down, the front camera looks even more likely to get hit.
That windscreen repair is in this post.
A four-pack of lens covers for 141 yen on AliExpress
What I bought was a clear protective cover that sticks onto a car camera lens. It comes in packs of two or four, and I went for four so I could fit one to my BYD ATTO 3 as well.
The price was 200 yen (about $1.25). After a discount, I paid 141 yen (under $1). So at that price, I didn’t mind if it turned out to be a miss.
I ordered on 1 November. The AliExpress proof-of-delivery photo showed the package like this.

Inside were a sheet of covers and a blue cloth.


This is the one I bought.
How to fit the lens cover on the Model YL front camera
This is the front camera before fitting the cover.

From an angle, you can see how it sticks out just below the number plate.

To fit it, you wipe the lens with the cloth supplied, peel off the backing and stick it on. That’s all.
The front camera with the cover on
From straight ahead, it looks like this.

I took photos from both sides at an angle as well.


Only raindrops stand out a little on the camera feed
After fitting the cover, I checked the front camera feed on the screen inside the car.
This is what it looked like during the day.

Overall, for normal driving, the cover doesn’t seem to cause any problems.
It was raining that night, so I also looked at the feed with raindrops on it. However, compared with no cover, the raindrops stand out a little more, and there’s some glare.
On a rainy night on November 14, while I was driving slowly around my neighborhood, the screen showed a Camera Visibility Limited warning. It’s asking you to clean the front bumper camera.

Here’s the front camera feed at that moment. The raindrops show up as blurry circles all over the image.

I think the raindrops didn’t get blown off because I was going slowly. I don’t think this warning ever appeared before I put the cover on, and it hasn’t come back since that one time.
Even so, I can still see what I need to, so I’m happy enough with it.
No cover on the rear camera, and two spares
Of the four in the set, I fitted one to the Model YL, and while I was at it, one to the ATTO 3 as well.
The rear camera probably won’t get hit by stones, so I’m not planning to cover it. I’m keeping the other two as spares.
Protect the Model YL front camera with a lens cover before it cracks
Having been quoted 74,250 yen when my X3’s front camera cracked, I put a 141-yen cover on the Model YL before anything could happen.
Raindrops show up a little more on rainy nights, but for normal driving it seems fine.
You just wipe the lens and stick it on, so if stone chips worry you, at this price it’s an easy thing to try.
So if a stone ever does hit the cover, I’ll swap in one of the spares.
For the car itself, Tesla’s Model Y page is the official reference.
This article is also available in Japanese.








